Reviewing Batch Data - Model T - Elcometer 480 Guia Del Usuario

9 BATCHING - MODEL T (continued)
Batch/Edit Batch/Rename Batch; Rename an existing batch.
Ÿ
Batch/Edit Batch/Clear Batch; Clear all readings within a batch
Ÿ
- but leaving all batch header information.
Batch/Edit Batch/Delete Batch; Delete a batch or all batches
Ÿ
entirely from the gauge.
Batch/Copy Batch; Copy a batch including the batch header
Ÿ
information; Limit Standard information and calibration details.
Batch/Deleted Reading/Delete without Tag; Delete readings
Ÿ
entirely.
Batch/Deleted Reading/Delete with Tag; Delete readings but
Ÿ
mark them as deleted in the batch memory.

10 REVIEWING BATCH DATA - MODEL T

10.1 BATCH STATISTICS (Batch/Review Batch/Statistics)
Displays statistical information for the batch including:
Number of readings in the batch (n)
Ÿ
Average reading for the batch (
Ÿ
Lowest reading in the batch (Lo)
Ÿ
Highest reading in the batch (Hi)
Ÿ
Range ( ); the difference between
Ÿ
the highest and the lowest reading
in the batch
Standard Deviation (σ)
Ÿ
Coefficient of Variation (cv%)
Ÿ
Low Limit (
Ÿ
High Limit (
Ÿ
Number of readings below the low
Ÿ
limit ( ); if set
Number of readings above the high
Ÿ
limit ( ); if set
Nominal value (x)
Ÿ
Press the 8 softkey to view the statistics for the each individual
geometry.
www.elcometer.com
); if set
); if set
)
X
R
20
en-18