Ob Calculations - FujiFilm SonoSite SII Guia Del Usuario

4 To save a picture of the finished calculation, tap
5 Tap Back to exit the calculation.

OB calculations

To measure gestational growth (2D)
For each 2D OB measurement (except CxLen and YS), the system saves up to three individual measurements
and their average. If you take more than three measurements, the earliest measurement is deleted.
1 In the patient information form, select OB exam type, and enter the LMP or Estab.DD for the patient, if
known.
2 On a frozen 2D image, tap Calcs.
3 Do the following for each measurement you want to take:
a From the calculations menu, select the measurement name.
Note The caliper tool may change depending on the measurement selected.
b Position the calipers by dragging.
c Tap Save Calc.
A check mark appears next to the saved measurement.
4 To save a picture of the finished calculation, tap
5 Tap Back to exit the calculation.
To measure fetal heart rate (M Mode)
1 On a frozen M Mode trace, tap Calcs.
2 Select FHR from the calculations menu. A vertical caliper appears.
3 Position the first vertical caliper at the start of the first heartbeat.
4 Position the second vertical caliper at the start of the next heartbeat.
5 Tap Save Calc.
6 To save a picture of the finished calculation, tap
7 Tap Back to exit the calculation.
8
.
.
.
User Guide Errata