Gynecology (Gyn) Calculations - FujiFilm SonoSite SII Guia Del Usuario

3 Do the following for both LVDd and LVDs measurements.
a On the EF calculations list, tap the measurement that you want to take.
b Position the calipers by dragging.
c Tap Save Calc.
A check mark appears next to the saved measurement.
4 To save a picture of the finished calculation, tap
5 Tap Back to exit the calculation.

Gynecology (Gyn) calculations

To measure uterus or ovary
1 On a frozen 2D image, tap Calcs.
2 Tap the name of the structure you want to measure: Uterus, R Ovary, or L Ovary.
3 Do the following for each of the length, height, and width measurements:
a Select the measurement name from the calculations menu.
b Position the calipers by dragging.
c Tap Save Calc.
A check mark appears next to the saved measurement.
4 To save a picture of the finished calculation, tap
5 Tap Back to exit the calculation.
To measure follicles
On each side, you can save up to three distance measurements on a follicle, for up to 10 follicles. If you measure
a follicle twice, the average appears in the report. If you measure a follicle three times, the average and a
volume calculation appear in the report.
1 On a frozen 2D image, tap Calcs.
2 Tap the name of the structure you want to measure: R Follicle or L Follicle.
3 Do the following for each follicle you want to measure:
a Tap a measurement number.
b Position the calipers by dragging.
c Tap Save Calc.
A check mark appears next to the saved measurement.
User Guide Errata
.
.
7