Descargar Imprimir esta página

General Safety Instructions - Bosch T50057 Traducción De Las Instrucciones Originales

Publicidad

en | 8 | T50057

2 General Safety Instructions

WARNING
Read and follow all safety notes and instructions!
Failure to follow the safety instructions may result in
serious injuries and material damages.
Observe and follow the safety notes below.
The load holding device has been specifically
constructed for its intended use. The safety of the
load holding device can no longer be ensured if it is
misused or modified in ways not expressly approved
by the manufacturer. Serious injuries or damage to
property can occur.
Ensure that each person using the load holding
device is familiar with these instructions and can
access them at all times.
Ensure that all users are also familiar with the
operating manuals of all tools and workshop
equipment, which are necessary for the work.
Carefully read and adhere to the instructions in the
technical safety information of the Volkswagen
Group brands.
Wear protective gloves in order to avoid cuts.
Wear safety shoes (according to ISO 20345, S2).
Position hands and feet carefully to avoid potential
crushing hazards.
Use the load holding device only for work approved
by the Volkswagen Group.
Use the load holding device only with the
accessories approved by the Volkswagen Group.
Do not exceed the maximum load capacity of 35 kg.
2018-05-08
Only use the lifting device for lifting out the drive and
the counter shaft of the 6 gear gearbox 0C6 in
accordance with the workshop manuals of the
Volkswagen Group brands.
Always screw the knurled screw into the counter
shaft completely to the stop.
Check that the lifting device is secure prior to lifting
the load with the workshop crane (e.g. VAS 6100).
Only drive the load with the workshop crane
(e.g. VAS 6100) on the lowest position.
Ensure that the track is clear and easily visible.
Move the load slowly and carefully.
Observe the lifting tackle as well as the load during
all movements.
The positioning of persons under the load and in the
dangerous area is prohibited during the movement
process.
Use the receiving device T50056 for secure
placement of the load.
Bosch Automotive Service Solutions GmbH
Am Dörrenhof 1
85131 Pollenfeld-Preith
Germany

Publicidad

loading