VDO X Serie Manual De Instrucciones página 11

D GB F I
Preface
Congratulations
With your selection of a VDO computer you have opted for a technically very high quality appliance.
In order to fully benefit from the potential of the computer, we recommend that you carefully read this
manual. It contains all operating instructions and many other useful tips.
We hope you enjoy cycling with your VDO bike computer.
Cycle Parts GmbH
Pack contents
Please first check that this pack is complete:
1 universal handlebar holder
1 VDO computer
Battery installed with cable and sensor
1 rubber pad 1 spoke magnet
for sensor (clip magnet)
20 X1
Table of contents
1. Display
2. Operation
3. Information functions
4. Installation
4.1
4.2
4.3
cable ties
for fitting the holder
and sensor
VDO CYCLECOMPUTING www.vdocyclecomputing.com
22
24
25
26
Fitting the sensor, magnet
and handlebar holder 26
Installing the battery in the computer 27
Placing the computer into
the handlebar holder 27
I F GB
5. Basic settings
5.1 Setting the language
5.2 Setting and measuring the wheel size
5.2.1 Select from tyre table
5.2.2 Setting using wheel circumference
5.3 Setting the CLOCK
5.4 Setting the total kilometres
5.5 Switch from Bike1 to Bike2
5.6 Service interval display
5.7 Sleep mode
5.8 Reset functions
6. Terms of guarantee
7. Technical spezifications
8. Troubleshooting
„>>> P02" links at the beginning of a chapter
are related to the respective picture in the
picture book!
X1
D
28
28
28
28
30
31
32
32
33
34
35
36
36
37
21