Steam/Coff Ee Switchover; Cleaning And Maintenance - Saeco XSMALL PLUS V2 ANT SIL SUP033R Instrucciones De Uso

amount of hot water in a glass and
clean the wand (or Pannarello when
provided) externally. In this way, all
parts will be perfectly cleaned and
free of any milk residue.
• Place a container under the hot water /
steam wand (Pannarello, if supplied).
• When the machine is ready to brew
coffee, turn the control dial counter-
clockwise to set it onto the " " posi-
tion. Residual water may come out of
the wand (Pannarello, if supplied).
• The " " light blinks during the prehea-
ting time required by the machine.
• Steam dispensing will begin when the
green light " " remains steady on; soon
after only steam will begin to come
Blinking
out.
• Turn the control dial clockwise and
set it back to the " " position to stop
dispensing steam.
• Fill 1/3 of the container you wish to use
Steady on
to prepare the cappuccino with cold
milk.
Use cold milk for better results
when preparing a cappuc-
cino.
• Immerse the steam wand (Pannarello, if
supplied) in the milk to be heated and
turn the control dial counter-clockwise
to set it to the " " position. Froth the
milk by gently swirling the cup and
moving it up and down.
• After dispensing steam for the desired
time, turn the control dial clockwise
and set it back to the " " position to
stop dispensing steam.
• The same procedure can be used to heat
other beverages.
After using the steam wand (Pannarello, if
supplied), wash it as described in the "Cle-
aning and Maintenance" section.
• 23 •
To brew a coffee: Follow the procedu-
re described in section "Steam/Coffee
Switchover" to bring the machine back to
the coff ee brewing temperature.
To dispense hot water: Follow the pro-
cedure described in section "Dispensing
Hot Water".
in order to save energy, automatically
reaches the temperature needed to
dispense coff ee.
Steam/Coff ee Switchover
• After dispensing steam and pressing
Blinking fast
• To brew coffee, first drain a small
• Now follow the procedure described in
CLEANING AND
MAINTENANCE
General Cleaning
• Empty and clean the dregdrawer daily,
• Maintenance and cleaning operations
• Do not immerse the machine in water.
After using steam to prepare
a beverage;
If the control dial is left on the
central position, the machine,
" " or " " coff ee button, the
" " light blinks quickly to show that
the machine is overheated and cannot
brew coff ee.
amount of water.
Place a container under the steam wand
(Pannarello, if supplied) and turn the
control dial clockwise to set it to the "
" position.
Wait for the temperature " " light to be
steady.
Then turn the control dial counter-
clockwise and set it back to the " "
position to stop dispensing.
the "Coffee Brewing" section to brew
coff ee.
with the machine turned on.
can only be carried out when the
machine is turned off and unplugged.