R82 Manatee Manual Del Usuario página 21

Disinfection
The product can be disinfected with a 70%
disinfectant IPA solution. It is recommended to wipe
off any residue and dirt from the product, using a
cloth with warm water and a mild detergent/soap
without chlorine and let it dry before disinfection.
Before disinfection
Remove the following items and clean them
separately: Cover, Cushioning & Accessories
Washing
The cover can be washed at max. 50°C using a mild
detergent in a washing machine.
Warewashing machine
This product can be washed at 60° using a mild
detergent for 10 minutes in a washing machine
designed for medical devices. Use the machine's
drying function to dry the product.
This product can be washed at 85° using a mild
detergent for 3 minutes in a washing machine
designed for medical devices. Use the machine's
drying function to dry the product.
Before washing
Remove the following items and clean them
separately: Cover, Cushioning & Accessories
Service interval
A detailed inspection of the product must be made
every 12 months (every 6 months for heavy users)
and every time the product is reissued for use. The
inspection should be carried out by a technically
competent person who has been trained in the use
of the product.
The lifetime of this product in normal use is 5 years
if all maintenance and servicing is carried out in
accordance with the manufacturer's instructions
and demonstrably recorded.
Service Check List:
Check and adjust the following functions as per their
intended use. Repair or replace any damaged or
worn-out parts. Please check the:
• Backrest and leg support is adjustable and can
be locked in position
• Zipper(s) & Velcro
• Chair is foldable/unfoldable
• Nuts and bolts on the product are tightened
• Product for cracks or signs for worn-out parts
• All labels on the product are intact
support.R82.org
Dismounting and Mounting the Cover
Follow the description below when the cover needs
to be dismounted and washed:
1. Unzip the cover on the back (A) and underneath
the seat (B)
2. Open the velcro underneath the chair (C) and
the cover can be pulled up (D) and off the chair
Follow the description below to remount the cover
on the chair:
1. Put the cover over the back and pull down (D).
Make sure that the foam cushions in the cover
are placed around the frame
2. Zip the cover on the back of the chair (A)
3. Mount the small cover piece with the zipper
underneath the chair (B). Make sure that the
velcro is pointing downwards
4. Tip up the leg support (E) and the velcro
underneath the seat (C) and underneath the
leg support (C) can be closed. Make sure that
the foam cushions in the cover are placed
around the frame
5. Tip down the leg support (E) and make sure the
velcro is fastened correctly
D
D
E
B
B
C
E
E
C
21
A
A
C
C
D
D
A
A
B
B
C
C
EN