Zhermack QUASAR Manual Del Usuario página 115

MAINTENANCE AND USE MANUAL
This Use and Maintenance Manual provides information on the utilisation, installation and
maintenance of the optical welding machine Quasar, manufactured by Zhermack.
• the machine must be used in accordance with the instructions in this manual: it is therefore
recommended that you read it carefully prior to installation and start-up. Make sure that you read
the entire manual and pay particular attention to messages written in bold type or items highlighted
by boxes and/or symbols: the symbols are designed to highlight situations involving danger or
requiring caution (see paragraph 1.2).
• observance of standards and regulations shown in this manual will ensure that the machine is used
properly and that maintenance work is carried out safely.
• this Use and Maintenance Manual is an integral part of the machine: it should therefore be kept
together with the machine so that it can be consulted as and when necessary (keep the booklet in
a secure dry place away from sunlight, atmospheric agents, etc.). It must be available for consultation
throughout the working life of the machine even when the machine is sold or finally dismantled.
• It is recommended that you keep this manual constantly updated by integrating any amendments,
additions or modifications made by the Manufacturer. Any notes or comments should be made on
the blank pages at the rear of the booklet (see Appendices: Notes).
• Use the manual properly so that it is not damaged in any way.
• Do not remove, tear or write on any part of the pages.
• If the manual is lost or damaged and its contents become illegible you can request a replacement
copy from the Manufacturer.
the purpose of this Use and Maintenance Manual is to provide users with information on how to
operate the machine properly. The manual contains all the information needed to use the device as
intended: in particular the manual includes instructions and information on the
following:
• correct installation of the machine;
• Detailed description of how the machine works and its components;
• Initial start-up;
• Scheduled maintenance;
• Basic Safety and accident prevention info.
this manual contains ten chapters each of which covers a specific argument.
The appendices at the rear of the manual are a useful complement to these chapters.
QUASAR/QUASAR PLUS
EN
CHAPTER 1: INTRODUCTION
HOW TO READ AND USE THE MANUAL
1.1
115 of 296