Unscheduled Maintenance; Requesting Technical Assistance - Zhermack QUASAR Manual Del Usuario

UNSCHEDULED MAINTENANCE

9.3
Unscheduled maintenance (to be carried out by qualified, authorised personnel only) includes
repairs of accidental breakages and replacement of worn or faulty parts.
All electrical and mechanical work must only be carried out by an authorised
Zhermack maintenance technician.
Modifications which alter the machine characteristics from a safety and risk
prevention viewpoint may only be made by the Manufacturer who shall then issue
a certificate stating that the machine conforms to safety standards. Therefore any
modification or maintenance tasks not actually described in this manual are to be
considered forbidden. If the machine is modified, tampered with or repaired by
unauthorised personnel or non-original spare parts are used the manufacturer is
relieved of all responsibility. If a maintenance task is required but is not described
in this manual you must contact an Authorised Servicing Centre.
RESTARTING AFTER A LONG PERIOD OF INACTIVITY
9.4
Should you intend to use the Quasar welder after it has remained idle for a long period
proceed as follows:
• clean the machine thoroughly (follow the instructions in paragraph 9.1 carefully).
• insert the plug in the mains socket.
• check that the following are working properly:
- up/down/rotating movements of the work platform
- mechanical pointer centring and on-rail movement
Should the welder fail to work properly contact an authorised Servicing Centre immediately.

REQUESTING TECHNICAL ASSISTANCE

9.5
to obtain technical assistance choose one of the following options:
1. contact your Authorised Servicing Centre.
2. telephone
the
+39 0425.597.611 and proceed as follows: give personal data (e.g. address and telephone n.), state
the information on the equipment ID plate (see paragraph 3.3) and explain the
problem clearly.
3. fax all the above information and a properly filled out ID Form (see Appendix A.2) to
+39 0425.53.596.
142 of 296
Zhermack Customer
MAINTENANCE AND USE MANUAL
EN
Assistance Service
QUASAR/QUASAR PLUS
on the number