Led Light Effects - SPORTSTECH ESX600 Manual De Usuario

Your training device has an integrated LED function on the display and body.
You basically have four options:
1. You can choose the standard function so that the color is based on the current number of watts
(W) of your workout and depending on the performance in
• Blue (0-100 W),
• Aqua (101-150 W),
• Green (151-200 W),
• Yellow (201-250 W),
• Orange (251-300 W)
• Red (301-350 W) or
• Magenta (350+ W)
is illuminated.
2. You can set the color of the lighting effects manually so that it stays the same long term.
3. You can do a heart rate-based workout with a hand-held heart rate monitor or a heart rate strap, in
which the colors corresponding to your heart rate illuminate as follows;
• Blue (up to 50% MHR),
• Aqua (50 - 57% MHR),
• Green (58 - 65% MHR),
• Yellow (66-73% MHR),
• Orange (74-81% MHR)
• Red (82-89% MHR) or
• Magenta (90+% MHR)
Here, the abbreviation MHR stands for your maximum heart rate.
4. You can turn off the LED function and train without any visual effects.
SELECTION OF LED LIGHTING EFFECTS:
To adjust the settings, proceed as follows:
1. Select performance-based lighting effects (standard):
This standard function (C00) is already preset when the device is delivered. To use this, connect your
device to the power supply as described above and start any training session. The lighting effects are
now automatically based on the intensity of your workout. Note: In stand-by mode, the LEDs light up
red by default.
2. Select manual continuous light:
If you do not want the color of the lighting effects to change according to the intensity, but rather to
stay the same, you can preset one of the seven colors mentioned above. To do this, press and hold

LED LIGHT EFFECTS

51
EN