General Description - Grundfos Multilift MOG Manual Del Usuario

3. General description

Grundfos Multilift MOG and MDG lifting stations are supplied
complete with collecting tank, connection accessories,
LC 221 controller and level sensor.
The following gives a description of the components.
Fig. 1 Multilift MOG front and rear view
Pos. Description
1 Pump with grinder system and vortex impeller
2 Lifting bracket
3 Nameplate
4 Venting port, DN 70 (outer diameter, 75 mm), open
Screw cap for pressure tube and tank inspection
5
opening
6 Vertical inlet, DN 150 (seal is accessory)
7 Fixing point
8 Oval flange for connecting the outlet line
9 Side or top inlet, DN 50 (seals are accessory).
Collecting tank with carrying handle moulded into
10
tank body
Port for manually operated diaphragm pump, 1 1/2".
11
Socket with seal.
12 Horizontal inlet, DN 100 (seal is accessory)
Adjustable inlet disk, DN 100 (DN 150 optional as
13
accessory)
6
Fig. 2 Multilift MDG front and rear view