1. Let the child sit in the child restraint,
check whether the shoulder belt
guides are at proper height.
2. Position shoulder belt through
shoulder belt guide, pass waist belt
through seat slots. Fasten buckle
and pull the vehicle belt to tighten.
31
!
Shoulder belt must pass through
shoulder belt guide.
!
Waist belt must pass through seat
slots.
!
The child restraint can not be used
if the vehicle safety belt buckle
(female buckle end) is too long to
anchor the child restraint securely.
!
Never use a vehicle waist-only belt
across front of child.
!
Do not use shoulder belt loose or
positioned under arm.
!
Do not use shoulder belt behind
child's back.
!
Do not allow child to slide down in
the child restraint in case of
strangulation.
19
31
32
1
2
Detach Soft Goods
see images
33
1. Remove the infant insert and
crotch strap.
2. Press the red button to disengage
the buckle.
3. Detach the hook and loop fasteners
on the head support, and then
-1
remove the head support.
33
4. Detach the snaps on the seat pad,
pull the buckle to the back of seat
pad, and then remove the seat pad.
!
Please do not remove any connector
which fixed to the plastic when
removing soft goods.
!
To assemble soft goods in reverse steps.
33
1
33
20