Test The Fuse; Replace Batteries And The Fuse - Fluke 106 Manual De Uso

106/107
Users Manual

Test the Fuse

1. Turn the rotary switch to
2. Plug a test lead into the  terminal and touch the probe to the A terminal.
• A good A terminal fuse is indicated by a reading less than 0.1 Ω.
•
If the display reads , replace the fuse and test again.
•
If the display shows any other value, have the Product serviced. See Service and
Parts.

Replace Batteries and the Fuse

To replace the batteries or the fuse, see Figure 5.
Be sure to observe Electro Static Discharge precautions.
22

(106 does not have ).
 Caution