Baby auto OTTO iSIZE IE71 Manual De Instrucciones página 38

To assemble the child seat in either of its two configurations (rearward facing or forward facing), you
must choose one of the five recline positions of the seat. For a rearward facing configuration, you will
need to place the seat in recline position 5. To assemble the seat in forward facing you can choose any
of positions 1, 2, 3, or 4.
38
Rearward facing configuration
Fig. 2
To assemble the child seat in rearward facing, you must
insert the seat from the rear of the base, while pulling
the recline lever
Adjust the seat in recline position 5 by pulling the
recline lever. The seat should be firmly attached to the
base.
1 2 3 4 5
Forward facing configuration
Fig. 3
To assemble the child seat in forward facing, you must
insert the seat from the front of the base, while pulling
the recline lever
Adjust the chair in recline position 1, 2, 3 or 4 by pulling
the recline lever. The seat should be firmly attached to
the base.
1 2 3 4 5
(K) (fig. 2).
(K) (fig. 3).