Installation; Rearward Facing Installation: Isofix And Top Tether (40-105Cm) - Baby auto OTTO iSIZE IE71 Manual De Instrucciones

6. SEAT INSTALLATION

6.1. Rearward facing installation: ISOFIX and Top Tether (40-105cm)

Put the ISOFIX insert guides into the two ISOFIX attachment points
of your vehicle. If you don´t have insertion guides skip this step.
NOTE: The ISOFIX attachment points are located between the
surface and the backrest of the vehicle seat.
1. Press the ISOFIX button and by pulling extract the arms
completely.
2. Hold the safety seat with both hands and insert the two ISOFIX arms
firmly into the insertion guides until they fasten with a click on both
sides. The indicator will turns into green on both sides.
3. Push the seat towards until it rests firmly against the vehicle seat.
Take the Top Tether and press the Top Tether regulator to extend
the strap. Fix the safety hook to the Top Tether anchor point
recommended in your vehicle instructions book.
CAUTION! Make sure to use the Top Tether anchor
point. Look for this symbol in your vehicle:
To tighten the Top Tether, take up any slack by pulling the
free end of the belt through the Top Tether adjuster. The
Top Tether will be correctly tightened when the tension
indicator change to green.
45