How To Use Harness Buckle; Adjust The Headrest - Baby auto OTTO iSIZE IE71 Manual De Instrucciones

5.2. How to use harness buckle

1 2
Bring the two clasps together. (1)
Make sure that there is no gap between the clasps and the right
side is above the left side. (2)
Fasten the two clasps together before inserting them into the
3 4
harness buckle. You should hear a click. (3)
Make sure the buckle is locked. (4)
To open the buckle, press the red button.

5.3. Adjust the headrest

Used as i-Size (40-105cm)
Loosen the shoulder straps of the chair as much as possible. Pull
up the headrest height adjuster, select the correct height for
the shoulder straps, and place it in the position that fits your
child by releasing the adjuster.
Used as i-Size booster (100-135cm)
Remove the shoulder straps from the harness height adjusting
shaft. Pull the shoulder straps out through the slots and hide
them under the textile cover. Remove the Height Adjustment
Shaft from the harness and keep it.
Pull up the headrest height adjuster and place it in the position
that fits your child by releasing the adjuster.
35