Kit Assembly - Metra 99-7612 Instrucciones De Instalación

Dash Disassembly
8. Remove the unified meter a/c
amp from radio chassis assembly.
(Figure G)
9. Remove (8) Phillips screws
securing the switch panel to the
radio trim panel. Unplug and keep
the harness and trim panel for Kit
Assembly. (Figure H)
Continue to kit assembly
(Figure G)
(Figure H)
99-7612
ISO DIN radio provision with pocket
1. Trim the shaded areas from the
factory radio trim panel. (Figure A)
Do not cut the locator and screw
hole off as they will be necessary to
mount the 99-7612 radio housing.
(See detail)
2. Attach the 99-7612 radio housing
to the radio trim panel using (4)
supplied 3/8" Phillips screws.
(Figure B)
Trim shaded areas
(Figure A)
Detail
3

Kit Assembly

3. Mount the radio housing brackets
to the aftermarket radio with the
screws supplied with the radio.
(Figure C)
4. Mount the pocket to the radio/
bracket assembly using (4) supplied
3/8" Phillips screws. (Figure C)
Continued on next page
(Figure B)
(Figure C)