FujiFilm SonoSite P16516-03 Manual Del Usuario página 15

Auto Trace and Manual Trace controls
The Help represents these controls incorrectly. These images show how the controls appear on the
system:
Administration settings
Once you add a new user, you cannot edit the user's name.
Archiving and exporting
Manual storage commitment
The ability to manually request storage commitment described in the X-Porte Help does not exist on
the system.
Archive control
The Archive control shown in the Help is incorrect. The Archive control on the system does not
include an icon.
Generate Patient ID option
The Generate Patient ID option enables the system to auto-generate a unique patient ID to
accommodate certain workflows. Typically, a Patient ID is provided via Modality Worklist or entered
manually. However, if the Patient ID option is enabled, you can generate a prefix string that is
attached to the beginning of the Patient ID. This enables you to easily search for the Patient ID on the
image storage system at a later time. To prevent confusion, the Patient ID option is only triggered
when starting a new exam from the patient information form.
P21xp Cardiac-RVSP measurements
When you take a TR VMax measurement using the P21xp transducer, save it, and then go to the
worksheet to adjust the RA pressure, X-Porte does not immediately update the value on the clinical
monitor to match the change you just made on the worksheet. The next time you take a TR VMax
measurement, however, the system updates the RVSP pressure according to the last RA pressure that
was selected on the worksheet and is displayed on the clinical monitor.
9