EB TECHNOLOGY START-S3XL-K Manual De Instrucciones página 18

START-S3XL-K
Foreword
This manual provides all the specifi c information you
need to familiarize yourself with and correctly operate
your unit. Read it very carefully when you purchase the
instrument and consult it whenever you have doubts
regarding use and before performing any maintenance
operations. The producer has the right to modify the
product without previous notice.
Environmental protection
measures
Information regarding the environment for
customers within the European Union. Eu-
ropean Directive EC 2002/96 requires that
units bearing this symbol on the unit and/or
on the packaging be disposed of separately
from undiff erentiated urban wastes.
The symbol indicates that the product must not be dis-
posed of with the normal household wastes. The owner
is responsible for disposing of this product and other
electrical and electronic equipment through specifi c
waste collection facilities indicated by the government
or local public agencies. Correct disposal and recycling
help prevent any potentially negative impact on the en-
vironment and human health. To receive more detailed
information regarding disposal of your unit, we recom-
mend that you contact the competent public agencies,
the waste collection.
Symbols and warning
DANGEROUS
This is a warning and if it is not re-
spec it can provoque material dam-
age.
DEVICE UNDER TENSION
The installation should be done
only from professional installer.
READ CAREFULLY THE
OPERATING MANUAL
Read carefully this manul before in-
stallation and keep it for the future.
Index
Par. Description
1 Introduction
1.1 Product description
1.2 Field of application
1.3 Type of installation
1.4 Technical features
2 Installation
2.1 Diagram of the control unit and electrical connections
2.2 Description of the electrical connection
2.3 Connection of the SIGNAL LIGHT 230 Vac
2.4 Connection of one 24V gate open and moving LIGHT
2.5 Connection of the COURTESY light
2.6 Power supply of the accessories
2.7 Connection of the STOP/ALT control devices
2.8 Connection of LIMIT SWITCHES LSO and LSC
2.9 Connection of the MAGNETIC LIMIT SWITCHES
2.10 Connection of the 24 Vac photocell
2.11 Connection of the 24 Vdc photocell
2.12 Connect the 3 wires photo-beam
2.13 Connection of the "START" and "PEDESTRIAN"
commands
2.14 Checking connections
3 Operating logic for DIP
4 Managing of Remote control
4.1 Activation of the radio receiver
4.2 DELETING the codes memory
4.3 Remote control LEARNING
5 Turning on and programming the unit
5.1 Learning "START" OPENING COMMAND times
5.2 Times learning with the "PEDESTRIAN" COMMAND
5.3 Regulating of the MOTOR FORCE
5.4 Increasing the PAUSE time
5.5 RESET at FACTORY SETTINGS
6 Problems solution
7 Declaration of CE conformity
-2-
Technical Manual
Pag.
3
4
5
6
7
8
9
10
16
12
13
14
15
16