22 | OC
1 2 DI SC BRA K E ROTOR
IN STAL LATIO N
For wheels with centerlock disc brake rotor mounting sys-
tems, check the torque of the rotor mounting bolt with the
rotor manufacturer*.
For wheels with a 6-bolt disc brake rotor mounting sys-
tem, check the mounting bolt torque with the rotor man-
ufacturer*. To ensure proper rotor installation, tighten
the bolts in a star pattern, checking all bolts for correct
torque a second time. Never use the bike if a rotor is
missing a bolt.
40-50 N.m*
CENTERLOCK
TECHNICAL MANUAL
O C WH EELS
1 3 T I RE AN D WH E E L COM PAT I BI L I TY
AND MAXIMUM PRESSURES
To ensure the safety and performance of your tires, check
that the inner rim width and tire width are compatible with
each other by consulting the recommendations in the
following table.
Check the tire manufacturer's manual regarding compati-
bility with different tire widths, but always check that your
tires are listed as a potential combination in this table.
1. Check the ETRTO designation on the tire you expect to
refers to the width of the tire (A) and the second refers
to the internal diameter of the tire (B):
T25
2-4 N.m*
Other tire size designations may be in another format;
6-BOLT
however, these do not give an accurate measurement
of the tire's internal diameter:
700 x 25C
29 x 2.4
2. Check the internal width of the rim you intend to use.
rim (C):
622 x 25C
25-622
A
B
3. See the table below for tire sizes compatible with a
4. Check the maximum pressure for the tire and rim com-
bination. Remember that a standard clincher rim and
a hookless tubeless rim will have different maximum
pressures, for a given tire-rim combination.
A
Always keep the pressure within the limits set by
pressure is included as possible on this chart for OC
A
wheels.
C
O C | 2 3
E N
A
HOOKLESS CLINCHER
CLINCHER ESTÁNDAR
C