Saf-Fro DIGISTEEL 250C Manual De Instrucciones página 32

Settings and Configuration Menu
To access the Settings and Configuration Menu:

Press the button [45] or right knob [44] to get access
to Welding Parameters Bar.

Use the right knob [44] to highlight the icon
"Configuration".

Press the right knob [44] to confirm the selection.
Figure 43
Table 14 Configuration Menu
Symbol
Limits
Display Configuration Settings
Brightness Level
Access control
Enable/ Disable Jobs Mode or Select
Jobs for Jobs Mode
Set the Language
Restore Factory Setting
Machine information
Advanced Setup
Cooler
Service Menu
Green Mode
Volume Level
Date / Time
English
Description
Limits – it allows the operator to set the
limits of main welding parameters in selected
job. The Operator is able to adjust the
parameter value within specified limits.
Limits can be set only for the programs stored in the user
memory.
Limits can be set for below parameters:

Welding Current

Wire Feed Speed

Welding Voltage

Hot Start

Arc Force

Pinch
To set the range:

Enter to „Configuration" menu.

Use right knob [44] to highlight „Limits" icon.

Press right knob [44] to confirm. List with available
jobs will be shown on the screen.

Use right knob [44] to highlight the job.

Press right knob [44] to confirm selection.
28
WARNING
Figure 44
Figure 45
Figure 46
English