Bosch 3KLIFTTABLE Instrucciones De Operación página 7

In the unlikely event of an uncontrolled descending lift, this lifting device has been equipped with a
mechanical safety latch. When the safety release lever is untouched it is in the active position. In this position
the mechanical safety latch will completely engage after experiencing a minimal downward motion, stopping
a full descent from occurring. When intentionally (or purposefully) lowering the Lift, first raise the Lift slightly
to remove pressure from the safety latch, and then squeeze the safety release lever to allow the Lift to
descend. See Figures 3 and 4.
WARNING: To prevent personal injury and/or equipment damage,
● Keep all body parts clear of the Lift when safety latch has been disengaged.
● Ensure the safety latch is fully engaged when performing maintenance or reaching
inside the scissor components of the Lift.
● Keep the Lift secured with the mechanical safety latch in case someone presses the
pump pedal, the platforms will not be lowered unintentionally.
Safety
Release
Lever
MECHANICAL SAFETY LATCH OPERATION
ENGAGED POSITION
(Lever Untouched)
Figure 3
DISENGAGED POSITION
(Lever Squeezed)
Safety
Release
Lever
Figure 4
© Bosch Automotive Service Solutions Inc.
Safety Latch
Engaged
Safety Latch
Disengaged
Page 7 of 20
SP04513059 Rev A