General Information
Product Name:
Product Type:
Product Number:
Weight:
Maximum Load
Capacity:
Maximum Pneumatic
Input Pressure:
Maximum Hydraulic
Pressure:
Noise Emission:
Dimensions:
Threaded Holes in
the Platforms:
Intended Use:
● To lift, lower, and transport loads, such as a high-
voltage/BEV/PHEV battery, engine, transmission,
seat, fuel tank, or axle.
Included in Delivery:
Product Number:
3KLIFTTABLE
–
–
Page 2 of 20
SP04513059 Rev A
Mobile Lift Table
Lifting Equipment
3KLIFTTABLE
1180 lbs (537 kg)
Complete Lift
Table: 3080 lb (1400 kg)
Extended Platform:
1540 lb (700 kg)
140 psi (9.5 bar)
5000 psi
86 dB(A)
Width: 37 in (940 mm)
Overall Length: 79 in (2008 mm)
Height (Completely Lowered:
22.2 in (564 mm)
Height (Completely Raised:
70.5 in (1791 mm)
Size: M10 X 1.5
Max. Torque: 50 ft lb (68 N•m)
Product Name:
Mobile Lift Table
Push Handle
Handle Screws
(3/8-16 UNC X 2" Full Thread)
© Bosch Automotive Service Solutions Inc.
Terms of Use:
● To lift, lower, and transport loads, such as
a high-voltage/BEV/PHEV battery, engine,
transmission, seat, fuel tank, or axle.
● To be used only by qualified personnel
trained in accordance with the automobile
manufacturer's standards.
● Use only for work expressly approved by
the automobile manufacturer.
● Use only on level, even, and stable ground.
● Use only indoors.
● Do not use in corrosive environments (e.g.
acidic or caustic).
● Do not use in potentially explosive
environments.
● Use only at ambient air temperatures
between 40-110°F (5-45°C).
● Use only at a relative humidity between
32% and 86%.
● Use only at a pneumatic input pressure up
to 140 psi (9.5 bar).
● Use for loads only up to 3080 lb (1400 kg).
When extending the platform, ensure that
the load on the extendable platform does
not exceed 1540 lb (700 kg).
● Do not use to lift persons or animals.
● Use the lifting equipment only with the
accessories that have been expressly
approved by the automobile manufacturer.
Quantity:
1
1
4