Starting / Stopping The Engine - Stihl MS 210 Manual De Instrucciones

N
Lift out the shutter (in front of spark
plug) vertically.
N Turn the shutter 180°.
N Refit the shutter.
N Refit the carburetor box cover and
secure it with the knob.
Heated air is now drawn in from around
the cylinder to warm the carburetor – this
helps prevent carburetor icing.
At temperatures above +70 °F (+
20°C), always close the shutter
again. This is necessary to avoid
engine running problems and
overheating.
MS 210, MS 210 C, MS 230, MS 230 C, MS 250, MS 250 C
Starting / Stopping the
Engine
Versions with Easy2Start
This machine is extremely simple
and easy to start, even for
children.
To reduce the risk of serious or fatal
injury:
– do not allow children or other
unauthorized persons to attempt to
start or otherwise use the machine
– never allow children or
unauthorized persons access to the
machine
– never leave the machine
unattended while working or during
work breaks
– after work, store in a safe, secure
location out of the reach of children
and other unauthorized persons
Positions of Master Control lever
STOP
0
Stop 0 – engine off – the ignition is
switched off.
Normal run position F – engine runs or
can fire.
Starting throttle n – this position is
used to start a warm engine. The Master
Control lever moves to the normal run
position as soon as the throttle trigger is
squeezed.
Choke closed l – this position is used
to start a cold engine.
Setting the Master Control lever
To move the Master Control lever from
the normal run position (F) to choke
closed (l), press down the throttle
trigger lockout and squeeze the throttle
English
35