Kit Assembly - Metra 99-7621 Instrucciones De Montaje

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ISO DIN radio provision with pocket
1. Attach the radio brackets to the
radio trim panel. (Figure A)
2. Mount the pocket to the bracket/
trim panel assembly with the
(4) #8 x 3/8" Phillips truss head
screws supplied. (Figure B)
3. Remove the metal "DIN" sleeve and
trim ring from the aftermarket radio.
4. Slide the radio into the assembly
and secure with screws supplied
with the radio. (Figure C)
5. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Test the
radio for proper operation.
6. Mount the new radio assembly into
the dash and reassemble the dash
in reverse order of disassembly.

Kit Assembly

(Figure A)
99-7621
(Figure B)
3
(Figure C)

Publicidad

Tabla de contenido
loading

Tabla de contenido