Maintenance; Specifications; Product Identification; Product Description - CAMPAGNOLA ALICE Manual De Uso Y Mantenimiento

2 - SafetY PrecautIonS

2.3 Maintenance

WARNING!
Before performing any maintenance operations or adjustments of the mechanical parts of the equipment, wear protec-
tive shoes, gloves and goggles.
Routine maintenance and repairs can be carried out only by an operator with the necessary physical and intellectual
•
qualifications.
• Special maintenance and repairs can be carried out only by a service mechanic.
• Keep bystanders away when servicing or repairing the machine.
• Only service mechanics are authorized to inactivate the safety devices provided on the machine when maintenance is to
be performed. It is their responsibility to safeguard the operators and the machine. The safety devices shall be activated as
soon as the maintenance operations have been completed.
• Before any maintenance operations or mechanical adjustments are carried-out, switch the tool off.
• All maintenance procedures not dealt with in this manual are to be performed at a CAMPAGNOLA S.r.l. Authorized Service
Point.
• When maintenance or repairs have been completed, the machine can be started again only if duly authorized by the
service mechanic. The service mechanic must make sure:
- work has been completed;
- the machine runs in a trouble-free way;
- the safety devices are activated;
- no one is working on the machine.
3

- SPecIfIcatIonS

3.1 Product identification

The tool identification details are indicated on the sticker.

3.2 Product description

ALICE mechanical head (picture A) is the top part of an electro-mechanical harvesting tool manufactured by CAMPAGNOLA S.r.l.
The electro-mechanical harvester is composed by three main parts: the harvesting head, the extension pole and the power unit.
For more details, see the power unit manual.
There are different models of each of the three components, but all are compatible in order to create the best solution for the
task to be carried out.
The various combinations are indicated in par. "Assembling possibilities" in the power unit manual.
The harvesting head makes fruit fall thanks to the rakes (1) clapping and waving movement among the branches.
The two rakes (1) are made of techno-polymer and fitted with teeth (3) of plastic material. They are extremely light and resistant
and make a clapping and waving movement in order to limit vibrations and noise and to give the best harvesting performance.
The rakes are operated by an engine. The motion reaches the harvesting head by means of a transmission pole (see the power
unit manual).
The mechanical head contains the cinematic mechanism operating the rakes (see picture C), the rakes (1) and their supports.
All information about the harvesting head and teeth operating system can be found in the manual of the chosen power unit.
18 - 68
60 - 68
18 - 96