Agilent Technologies Turbo-V 2300 Manual De Instrucciones página 229

Command: ERR-CODE
Source: PC
Destination: Inverter
02
STX
Source: Inverter
Destination: PC
02
STX
Using the RS 485 interface, the message structure remains identical to the one
NOTE
used for the RS 232 interface, the only difference being that the value assigned
to the ADDRESS <ADDR> field in this case can be any hex value, while for the
RS 232 this value must be set to 80 hex.
Turbo-V 2300 Rack Controller User Manual / 87-901-022-01 (B)
80 32 30 36
ADDR WINDOW
80 32 30 36 30
ADD WINDOW RD
Technical Information
30 03 38 37
RD ETX CRC
30 30 30 30
000000
Examples
30 30 03 38 37
ETX CRC
229/262
17