Startup
The above message is only displayed when a board with optional serial ports is
NOTE
installed.
The controller with the Soft Start mode allows the pump to ramp-up
to Normal Speed slowly with a minimum ramp-up time of 30 minutes
and a maximum of about 55 minutes.
The Soft Start mode is always operative as default mode. If it is
necessary to deselect this mode refer to the following paragraph.
If the Soft Start mode is deselected, the ramp- up will be done within
360 seconds and the display changes as follows:
P
Turbo-V 2300 Rack Controller User Manual / 87-901-022-01 (B)
Plug the controller power cable into a suitable power source.
The display lights, and shows:
A
A
U
M
P
S
T
A
R
U
T
O
T
E
C
H
E
C
K
U
T
O
T
E
O
K
R
E
A
D
Y
T
B
U
T
Technical Information
Use
S
T
S
T
:
P
U
T
O
N
233/262
17
S
H
H
S