Bremont REGATTA AC Manual Del Usuario página 6

After 5 minutes the left window will be blue and the right window white,
signifying that the countdown timer is complete.
The countdown display will continue to change after 5 minutes until it
has been stopped using Push-Button A. Operating Push-Button A again
will continue the countdown and pressing Push-Button B will reset the
countdown back to its starting position. The countdown display will
repeat every 15 minutes.
CHRONOMETER TESTING
Your Bremont watch is chronometer tested and accompanied by a performance
certificate issued by the 'Controle Officiel Suisse des Chronometeres' (COSC)
to show that the mechanical movement has passed all of the rigorous precision
tests - a necessity of the chronometer designation.
Remember to complete and return the CosC registration card to
Bremont to register your watch and receive your certificate.
The chronometer certification, which takes 15 days to complete over several
different temperature ranges and watch positions, means that the average
daily variation rate will be between -4 and +6 seconds. With 86,400 seconds
in a single day, this gives Bremont' s watches an accuracy of 99.998%.
WATCH CARE
Bremont watches are put through extensive testing before they are released
from the workshop - whether it is for time-keeping precision, temperature,
shock and scratch resistance or pressure testing; all of our strict tolerances have
to be met. Although Bremont watches have more than proved their resilience
before they are released from our workshop, we want to ensure that the
enjoyment that comes from wearing a Bremont timepiece lasts generations. We
therefore recommend that the following tips for watch care are observed...
CleanIng
Use warm water followed by a microfibre cloth to clean metal and sapphire.
CRown
Ensure that the crown is pushed in to prevent entry of water into the
mechanism.
sea wateR
Wash with fresh water following exposure to saline water.
shoCks anD Jolts
Avoid any heavy shocks to the watch.