Bremont WATERMAN Manual Del Usuario página 9

zone. Before setting the 24 hour hand ensure that the local time is set on
the watch first. To set the 24 hour hand, pull the crown out to position
II, this will not stop the movement from running. Whilst the crown is in
position II, rotate the crown clockwise to set the 24 hour hand to the 24
hour markers on the dial ring. For example, if you set the watch to 1pm local
time and your second location is 5 hours ahead, you would set the 24 hour
hand at 18 hours.
USING THE ROTATING BEZEL
Your BREMONT WATERMAN LIMITED EDITION has a uni-directional
rotating bezel which can be used to keep track of elapsed time. For
example, if the time on your watch reads 12:20, align the triangle on the
bezel with the minute hand. Now, say the time is 12:40, the minute hand
position will point towards 20 on the bezel, indicating that 20 minutes of
time has elapsed.
CHRONOMETER TESTING
Your Bremont watch is chronometer tested to ISO 3159 standards and
accompanied by a performance certificate to show that the mechanical
movement has passed all of the rigorous precision tests - a necessity of the
chronometer designation.
Remember to complete and return the registration card to
Bremont to register your watch and validate your warranty.