melitta CAFFEO SOLO&perfect milk Manual De Instrucciones página 80

Phase 1
During Phase 1, one bean symbol
3 Empty the drip tray and then re-insert it without the coffee grounds
container, and place the coffee grounds container under the
Cappuccinatore. Make sure that the control dial is set to the position
with the „hot water" symbol
→
The symbol for the water tank
4 Lift the lid of the water tank (Fig. A, no. 7) and pull the water tank up
and out of the appliance and then empty it completely.
5 Add the descaling agent (e.g. Melitta
liquid descaler) to the water tank according to the instructions on the
packaging.
The total quantity of descaling solution (descaling agent + water) should
not exceed 0.5 litres (see marking line in the water tank).
Warning!
The descaling agent can cause skin irritations
Comply with the safety instructions and the dosing information specifi ed on the
descaling agent packaging.
6 Reinsert the water tank.
7 Press the button for steam dispensing
descaling programme.
→ Phase 1 is completed.
78
is shown on the display.
.
lights up.
® ANTI CALC Espresso Machines
to start the integrated