Set Dip-Switches - Audi Wallbox Manual Del Usuario

Set DIP-switches

The power board has two groups of 5-pin DIP-switches:
› Group A determines the coil type used for
the current transformer and defines the
ground loss monitor functionality.
In the following illustrations and tables, the upper switch position is being referred to as
position 1, whereas the lower switch position is being referred to as position 0.
DIP-switch positions:
GROUP A
Example of DIP-switch setting: 0, 0, 0, 1, 1
30
CT-TYPE
› Group B determines the maximum availa-
ble current of the facility/house, or of the
wallbox itself, depending on the group A
configuration.
GROUP B
P LIM