Transport, Packaging And Storage; Operation; Initial Start-Up; Setting Up The Charging Station - Heiniger Saphir Traducción Del Manual Original

Ocultar thumbs Ver también para Saphir:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 74
5

Transport, packaging and storage

Check the delivery on receipt immediately on completeness and damage
in transit.
NOTE!
Complain any damage as soon as you discover it. Claims for damages only
may be made within the valid time.
For the packaging, just non-polluting material is being used.
The packaging is to protect the individual components from transport dam-
age, corrosion and other forms of damage prior to use.
Store clipper and accessories on the following conditions:
Always store in the packaging supplied with it.
X
Do not store outdoor.
X
Store dry and dust-free.
X
Protect against solar irradiation.
X
Avoid mechanical shocks.
X
Storage temperature: 0 until 40 °C.
X
Relative humidity: max. 75%.When storing longer than 3 months, check
X
periodically the general condition of all parts. If necessary, refresh or
renew the conservation.
6

Operation

WARNING!
Incorrect operation may cause damage on persons or objects. Therefore:
y Do all the steps of operation according to the indications in this instruc-
tion manual.
6.1

Initial start-up

6.1.1

Setting up the charging station

y Observe all technical data according to the operating conditions (3 Tech-
nical Data).
y The installation surface must be even and must dispose of sufficient sta-
bility and payload.
y The location of installation must be protected against humidity and rain.
y Power outlets in the outer area must be equipped with a residual current
circuit breaker (FI).
y The workplace must dispose of sufficient illumination and ventilation.
y The location of installation must be out of reach of children.
Translation of the original instructions / Small animal clipper
11

Publicidad

Tabla de contenido
loading

Tabla de contenido