Markings On The Product - BRAND accu-jet pro Instrucciones De Manejo

9. Always check the instrument for visible damage before use. If there
is a sign of a potential malfunction, immediately stop pipetting. Con-
sult the 'Troubleshooting' section of this manual (see page 46), and
contact the manufacturer if needed.
10. Only the original AC adapter can be used for recharging of the
nickel-metal hydride battery.
11. The AC adapter has to be protected against moisture and must be
used only for this instrument.
12. Only authorized service personnel may repair or service the instru-
ment.
13. The battery must not be replaced with non-rechargeable batteries or
rechargeable batteries of other manufacturers (s. page 38).
Warning!
Improper use of the instrument or the battery (short-circuit, mechanical
damage, overheating etc.) may cause the explosion of the battery.
Markings

Markings on the product

Meaning
Follow the instructions listed on the device, the
accessory parts and in the operating manual.
Observe the operating manual.
Safety Instructions
29