Operation - cecotec CleanFry 3000 Profilter Manual Del Usuario

Once the ends of the bars are inserted in the bracket on the frying basket (6), push the
handle (7) backwards (ill. a and b). Do not assemble any other way (ill. c).
3. Make sure the oil reservoir (9) is secured in the correct position with the oil filter cover (11)
and oil valve (12) on the same side than the oil-filtration control knob (14) (ill. d).
4. Ensure the oil filter cover (11) is in place inside the oil reservoir (9).
5. Make sure the control panel unit (21) is placed on the connecting plate on the back of the
housing (13). Ensure the grooves of the connecting plate are in the guides of the control
panel unit (ill. e).

4. OPERATION

WARNING: Your appliance is equipped with a safety switch (5) located on the control panel
unit (21). If the control panel unit (21) is not placed properly in its position, the appliance will
not operate.
NOTE: Before plugging it into the wall outlet, ensure that the electrical circuit is not overloaded
with other appliances.
This appliance can be used for frying food such as French fries, chicken or fish pieces (see
Recommended frying times and temperatures).
1. Place the appliance on a clean, flat and heat-resistant surface. When using the appliance
on wooden surfaces, use a heat-resistant mat to protect wood from damages.
2. Ensure a minimum distance around the appliance of at least 11 cm to other objects, cup-
boards and walls.
3. Ensure the clean-oil container (15) is assembled, empty and in place inside the appliance,
the oil filtration control knob (14) is on the LOCK position and the oil filter cover (11) is in
place inside the oil reservoir (9).
4. Pour suitable cooking oil into the oil reservoir (9) (ill. f).
WARNING: Never refill the oil reservoir (9) during use or while hot. Always allow the appliance
to cool down completely. Do not mix new oil with old oil.
5. Spread a little oil on the inside of the view window (2) to prevent condensation.
6. Place the lid (3) on the fryer
7. Turn the temperature control knob (23) to the 0 position.
8. Insert the plug (17) into a wall outlet.
9. Turn the temperature control knob (23) to the required temperature (see Recommended
ENGLISH
CLEANFRY 3000 PROFILTER 23