cecotec CleanFry 3000 Profilter Manual Del Usuario página 26

ENGLISH
AVOIDING BURNS
• Do not touch the lid (3) or appliance housing (13) during or after use (ill. i). Only use the
handles (1, 7, 19) provided.
• Always pay special attention when adding or removing accessories and food from the
appliance.
• Never touch the lid (3) or appliance housing (13) when the appliance is plugged in and
switched on or immediately after use. It is recommended to always use oven mitts.
OIL FILTRATION
• Filter oil after each use. Store filtered oil properly (see Storing oil).
• Discard oils that have been used to cook certain food (see Cooking with oil).
• After switching off the appliance, wait at least 3 hours for oil to cool down. Hotter oil will
take longer to reach a cool temperature.
• Filtering oil after each use will help prolong the life of the cooking oil, but it should still be
discarded if the oil is deteriorated after multiple use. It is recommended to change oil, in
normal use, every 10 uses.
1. Ensure the clean-oil container (15) is assembled, empty and in place inside the appliance.
2. Once oil has cooled down to room temperature, turn the oil filtration control knob (14) to
the FILTER OIL position (ill. r). Oil will start dripping inside the clean-oil container (15). The
oil filter will keep food residues from being transferred to the clean-oil container (15).
3. When all oil has been filtered, turn the oil filtration control knob (14) to the LOCK position
if the container will remain inside the appliance.
4. Then, turn the oil filtration control knob (14) to UNLOCK position if the container is to be
removed from the appliance.
EMPTYING THE CLEAN-OIL CONTAINER
Filtered oil can be stored in a suitable container (see Storing oil) or re-used for frying a new batch of
food (see Cooking with oil).
1. Unscrew the cap (16) on top of the clean-oil container (15) (ill. s).
2. Slowly pour the clean-oil container (15) content into a suitable container or the oil reser-
voir (9), if required. Ensure the oil filtration control knob (14) is on UNLOCK position before
pouring oil into the oil reservoir (9).
3. Tilt the clean-oil container (15) upwards (vertical position) gradually to avoid leaks from
the side of the container.
26 CLEANFRY 3000 PROFILTER