Publicidad
Idiomas disponibles
Idiomas disponibles
GB
Package contains:
2
wiring harnesses, 2-core
2
butt connectors
Important notes:
Please read the installation manual before starting work.
The wiring harness kit must be installed by a qualified technician.
Please follow current vehicle repair guidelines when carrying out any installation work.
Required steps, general:
1. Disconnect the earth wire from the battery.
2. Lay out and install the 2-core wiring harness.
3. Function test.
1. Disconnect the earth wire from the battery
To avoid electrical shorts during installation and for general safety reasons, the earth wire must be disconnected from
the battery before starting work
If it is unclear how to match the wires to the signal assignments on the vehicle the wiring diagram
"signal assignment overrides signal colour"; clerical mistakes and modifications reserved.
Distributed by Volkswagen Zubehör GmbH Printed in Germany by Volkswagen Zubehör GmbH 12.04.2016
(fire hazard)!
Warning: On-board computer/anti-theft device!
Disconnecting the battery may result in data loss!
Follow the manufacturer's instructions!!
Read out the error memory before starting work!
may have to be consulted. The general rule is:
- 12 -
Publicidad
