Daitsu CDV 57 Manual De Instrucciones página 19

(1)Long press "FUNCTION" button for 5s to enter the interface of parameter
enquiry. "C00" is displayed in the temperature zone and the icon "CHECK"
lights up;
(2)Press "▲" or "▼" button to select parameter code;
(3)Press "ENTER/CANCEL" button to return to the previous step until system
exits parameter enquiry.
The parameter enquiry list is as following:
Parameter Parameter
code name
Entrance of
C00 adjustable
parameter
View the
project
number and
locate the
C01
faulted water
tank or hot
water
generator
Table 3.1 Parameters viewing list
Parameter
range
In "C00" status, Timer zone shows the current water tank or
hot water generator project number. When one wired
- controller is controlling multiple water tank or hot water
generator units, then only the smallest project number will
be displayed.
Operation method:
Enter viewing: press "MODE" button in "C01" status to enter
the interface of project number of water tank or hot water
1-255:
generator. Press "▲" or "▼" button to switch codes between
project
water tank and hot water generator.
number of
Display method :
online
Temperature zone: malfunction of the current water tank/hot
water tank
water generator (only the malfunction of water tank/hot
or hot
water generator is displayed. The temperature zone will
water
display the breakdown in turn with an interval of 3 seconds if
generator
there are several malfunctions)
Timer zone: (C5 malfunction of project number conflict)
/project number of the current water tank or hot water
15
Wired Controller CDV 57
Viewing method