Water Heating Mode Setting - Daitsu CDV 57 Manual De Instrucciones

Wired Controller CDV 57

4.3 Water Heating Mode Setting

When water heating is on, press "MODE" button each time, then mode will cycle
in the order below:
Standard hot water mode: The water tank/hot water generator immediately starts
or stops heating according to current water temperature setting.
Preset hot water mode: Preset the water heating time, so that the water tank/hot
water generator will be started in advance according to the actual water temperature.
Meanwhile, the compressor may be started or stopped according to the difference
Figure 4.1 Water Heating On/Off Interface
Figure 4.2 Switchover of Water Heating Mode
24