Clean Setting; Remote Shield Function - Daitsu CDV 57 Manual De Instrucciones

Wired Controller CDV 57

4.20 Clean Setting

Start the water pump, which is used for engineering evacuation, water line
cleaning, etc.
Long press the "WATER/AC/FLOOR" button for 5s when water heating and floor
heating are off and not during high-temperature sterilization, and the word "CLEAN"
will light up; During cleaning, the word "CLEAN" will flicker. Long pressing the
"WATER/AC/FLOOR" button for 5s will stop the cleaning, and the word "CLEAN" will
run out.

4.21 Remote Shield Function

Remote shield function: the remote monitor or centralized controller can shield
buttons of relevant functions of the wired controller, to void its operation, and then
realize remote control.
The remote shield function contains whole shielding and partly shielding. When
under whole shielding, the operation to all buttons of the wired controller will be void.
While under partly shielding, the operation to shielded buttons of the wired controller
will be void.
When the wired controller is under the remote shielding by the remote monitor or
centralized controller, the icon of "
operates the button of the wired controller.
" will be displayed. And it will flicker when user
54