Daitsu CDV 57 Manual De Instrucciones página 21

several water
tanks or heat
water
generators at
the same time
View outdoor
C12 ambient
temperature
One-button
viewing of
water tank or
C18
hot water
generator
project number
- Timer zone: display outdoor ambient temperature
Operation method:
Enter viewing, short-press "MODE" button in "C18" status to
turn on the function of one-button viewing water tank or hot
water generator project code, and the wired controller will
enter the interface of viewing water tank or hot water
generator project code. Press "▲" or "▼" button to select
the water tank or hot water generator.
Display method:
1~255 Temperature zone: displays number of the current water
Project tank or hot water generator.
number of Timer zone: displays project number of water tank or hot
online water generator.
water tank Note:
or hot 1.After turning on the one-button viewing function, each
water wired controller of the entire system will display the project
generator number of its controlling water tank or hot water generator
on its timer zone. (The timer zone will display different
project numbers in turn with an interval of 3 seconds if one
wired controller is controlling multiple water tank or hot
water generator.)
2.Slave wired controller cannot turn on or off the function of
one-button viewing water tank or hot water generator project
number.
Cancel method:
17
Wired Controller CDV 57