Water Temperature Auto Setting Function Of Floor Heating; Setting Of Rapid Floor Heating - Daitsu CDV 57 Manual De Instrucciones

Wired Controller CDV 57
When the floor heating is off, only the function of Absence can be set;
4.15 Water Temperature Auto Setting Function of Floor
Heating
Water temperature auto setting function of floor heating: the set outlet water
temperature for floor heating is given by the main board of hot water generator
according to the outdoor ambient temperature. User doesn't need to set the water
temperature.
Set water temperature auto setting function of floor heating: press the
"FUNCTION" button when the floor heating is on to switch to the automatic function,
and the icon of "
automatic setting level flashes, press "▲"or"▼"to switch automatic setting level.
Press the "ENTER/CANCEL" button to enable this function.
Cancel water temperature auto setting function of floor heating: press the
"FUNCTION" button when water heating is on to switch to the automatic function and
press the "ENTER/CANCEL" button to cancel it;

4.16 Setting of Rapid Floor Heating

Rapid floor heating: turn on the compressor and electronic heating of floor heating
when the outdoor unit allows to;
Set rapid floor heating: press the "FUNCTION" button when floor heating is on to
switch to the Rapid function, and the icon of "
"ENTER/CANCEL" button to enable the function;
" will flicker.At the temperature display zone of LCD, the current
46
" will flicker. Press the