Water Temperature Auto Setting Function Of Water Heating; High-Temp Sterilization Setting - Daitsu CDV 57 Manual De Instrucciones

Wired Controller CDV 57
Cancel sun-flower function: press the "FUNCTION" button when standard water
heating mode is on to switch to the sun-flower function, and press the
"ENTER/CANCEL" button to cancel it;
4.7 Water Temperature Auto Setting Function of Water
Heating
Water temperature auto setting function: the set water temperature for water
heating is given by the main board according to the outdoor ambient temperature.
User doesn't need to set the water temperature.
Set water temperature auto setting function: press the "FUNCTION" button when
water heating is on to switch to the automatic function, and the icon of "
Press the "ENTER/CANCEL" button to enable the automatic function.
Cancel water temperature auto setting function: press the "FUNCTION" button
when water heating is on to switch to the automatic function, and press the
"ENTER/CANCEL" button to cancel it;

4.8 High-temp Sterilization Setting

High-temperature sterilization function: the water temperature of the water tank is
required to be heated to 65 to 70 ℃ (configurable) in the required time for
high-temperature sterilization;
When the number of high-temperature sterilization cycle days is 0, it means the
sterilization set is only available for once:
Set high-temperature sterilization function: press the "FUNCTION" button in the
28
" flickers.