Function Switchover Of Floor Heating - Daitsu CDV 57 Manual De Instrucciones

Set outlet water temperature range of floor heating: 25℃ to the highest outlet
water temperature of floor heating; default as 40℃;
Note:
① The highest outlet water temperature of floor heating is defaulted as 45 ,
which can be adjusted in the range of 40
② When the automatic water temperature setting function of floor heating is
available, the "▲" or "▼" button can not be used to adjust the set water
temperature of floor heating;

4.14 Function Switchover of Floor Heating

Under the floor heating on/off status, the functions available for set are shown in
the table below:
Floor heating on/off
On
Off
In the floor heating interface:
When the floor heating is on: press the "FUNCTION" button, and switch the
functions in the following order:
Figure 4.14Function Switchover under Floor Heating On
Water temperature auto setting of floor heating, rapid
floor heating, Absence
Absence
45
Wired Controller CDV 57
to 52 by professionals;
Functions Note
--
--