Daitsu CDV 57 Manual De Instrucciones página 35

When the number of high-temperature sterilization cycle days is above 0, it
means the sterilization function is available for cycling:
Set high-temperature sterilization function: press the "FUNCTION" button in the
water heating interface to switch to the sterilization function, and the icon of "
flicker. Then press the "▲" or "▼" button to adjust the temperature of
high-temperature sterilization. Press the "TIMER" button, and the time zone will
flicker. Press the "▲" or "▼" button to adjust the preset time of high-temperature
sterilization, and press the "ENTER/CANCEL" button to enable the high-temperature
sterilization function;
Cancel high-temperature sterilization function: press the "FUNCTION" button in
the water heating interface to switch to the sterilization function, and press the
"ENTER/CANCEL" button to cancel it;
Note:
The preset time of high-temperature sterilization is considered as void, and the
time zone shows "--:--';
The cycling days of high-temperature sterilization can be changed or set by
professional technicians, and the number of factory default high-temperature cycling
days is 0;
31
Wired Controller CDV 57
" will