Programming Mode - Siemens SITRANS Probe LR Manual Para La Puesta En Marcha Rápida

Hand programmer.
For direct access to SITRANS Probe LR,
point the programmer at the
SITRANS Probe LR display and press
the keys. (For detailed instructions, see
the next page.)
hand-held programmer
display
max. 600 mm
(2 ft)
Security: (P000: Lock)
Value
Value stored in P069
other
* Factory setting for P069 is 1954: after a new value is entered and accepted, it becomes the
default setting.
Activating SITRANS Probe LR
Power up the instrument. SITRANS Probe LR starts in RUN mode.
Notes:
• Keep infrared devices such as laptops, cell phones, and PDAs, away from
SITRANS Probe LR to prevent inadvertent operation.
• The following instructions apply when using the Hand Programmer.
• Do not use the Hand Programmer at the same time as SIMATIC PDM, or erratic operation
may result.
• You do not need to key in initial zeros when entering a parameter number: for example,
for P005, key in 5.
1.
SIMATIC® is a registered trademark of Siemens AG.
Page EN-10 SITRANS Probe LR – QUICK START MANUAL
All manuals and user guides at all-guides.com
Key
to
* Lock off: programming permitted
Lock activated: no changes permitted

Programming Mode

Values
Decimal point
Negative value
CLEAR value
TOGGLE between Units and % on parameter
value
End PROGRAM session and enable RUN mode
Update echo quality parameters
Parameter scroll-up
Parameter scroll-down
DISPLAY opens parameter fields
ENTER the displayed value
Description
A5E32106153