Programming The Transmitter; Important - Siemens SITRANS F FST020 IP65 NEMA 4X Instrucciones De Servicio

Connecting

3.2 Programming the Transmitter

3.2 Programming the Transmitter
Note
Before creating a site select English or metric units from the Meter Facilities menu.
Select a Meter Type
1. After power-up, press <ENTER> key to access the top level of the Installation Menu.
2. [Single Channel] meter type appears.
3. Press <Right Arrow> key twice to select [Channel Setup] menu.
Note
IMPORTANT: Colon appears when menu item is selected for entry.
Create a Site
1. Press <Right Arrow> key and then <Up/Down Arrow> keys to select [Create/Name Site].
2. Press<Right Arrow> key to select the "?" symbol (see figure below).
3. To create site name use the <Up/Down Arrow> keys and <Right Arrow> keys to select a
name.
4. Press <ENTER> key to save the Site name.
18
FST020 IP65 NEMA 4X Quick Start
Operating Instructions, 08/2014, A5E03086489-AJ