Local Programming; Program Mode - Siemens SITRANS LR 300 Guía Para La Puesta En Marcha

PROGRAM Mode Display
Parameter type
Parameter
value
Inactive
Bar graph
Programming indicator
If the SITRANS LR 300 is left in PROGRAM mode for 10 minutes without input, it automatically
reverts to RUN mode.

Local Programming

The hand programmer is used for local programming sequences. Please make sure you hold
the programmer close to the unit (within 15cm [6"]), and point it directly at the bottom of the
display to activate the programming options.
Display
Max. 150 mm (6")

PROGRAM Mode:

The PROGRAM key
The EDIT icon appears when you key in a new value: it remains visible until you press the
ENTER key and the new value is accepted.
7ML19985QA81
Hand programmer
toggles between RUN and PROGRAM mode.
SITRANS LR 300 – QUICK START MANUAL
Parameter number
Key Programming Mode
Clear value
Toggle between Units and % on
parameter value
Toggle between PROGRAM and
RUN mode
Update echo quality parameters
Parameter scroll-up
Parameter scroll-down
Toggle fields
Enter the displayed value
Index value
Percentage or Units,
dependent on parameter
value
Blinking "Heartbeat" ,
indicates device is
running
EDIT icon indicates new
value being entered
Page EN-5