Check the power cord regularly for damage. Do not use the
appliance if the power cord is damaged. If this cable is
damaged, it must be replaced by customer service or a
qualified electrician in order to avoid dangers.
The supply cable must be disconnected from the socket
only by pulling the plug.
Never carry or lift the device by the supply cable.
In any case do not open the device housing. In case of
electrical or mechanical modifications the electric shock
hazard will occur.
Do not use any acid agents and make sure no water ingresses
the device.
Never operate the device with moist hands or standing on
wet floor.
Disconnect the device from the electric power supply.
when the device is not used,
-
in case of anomalies during operation,
-
before cleaning.
-
HOT SURFACE! Burn hazard!
Follow the safety instructions listed in order to avoid the hazard:
The heating plates and external surfaces of the appliance
become very hot during the operation. In order to avoid burns
never touch those surfaces with bare hands and use only
handles and temperature control knob during the operation.
- 25 -