•
Check that only replacement
tools authorised by the manuf-
acturer are used.
Electrical Safety:
•
Ensure that the mains voltage
matches the specifications on
the rating plate.
•
Connect the equipment only to
a socked with a residual cur-
rent-operated protective device
(RCD) with a release current of
more than 30 mA.
•
Avoid bodily contact with
earthed parts (e.g. metal
fences, metal posts).
•
Use only authorised power ca-
bles of type H05RN-F, which
are no more than 75 m long and
suitable for outdoor use. The
power cable wire cross section
must be at least 2.5 mm
ways completely unroll cable
drums before use. Check the
cable for damage.
•
To fix on the power cable, use
the cable suspension intended
for the purpose.
•
Keep the power cable away
from the cutting tool when wor-
king. The cutting blades may
damage the power cable and
result in contact with live parts.
Always run the power cable be-
hind the operator.
•
Do not use the power cable to
pull the plug from the socket.
Protect the power cable from
heat, oil and sharp edges.
•
Switch off the equipment and
disconnect the plug from the
socket if the power cable is
damaged. If the power cable is
damaged, it must be replaced
by the manufacturer, the custo-
mer services of the same, or
a qualified person, in order to
avoid hazards.
•
Do not connect a damaged
power cable to the mains. Do
not touch a damaged power
cable when it is connected to
the mains. A damaged power
cable may result in contact with
live parts.
General Description
Function Description
The electric lawnmower has a cutting tool,
which turns parallel to the cutting level.
It features a powerful electrical drive, a
sturdy plastic casing, a safety switch, a
collision guard as well as a grass catcher
. Al-
2
with level gauge. Additionally, the equip-
ment is height adjustable to six levels and
has smooth-running wheels.
For the function of the operating parts,
please refer to the descriptions below.
Übersicht
The illustration how to handle the
appliance can be found on page
2-3..
1 Curved handle
2 Start lever
3 2 quick-release levers above to
fasten bow-type handle
4 Lower bar
5 Collision guard
6 2 quick-release levers below to
fasten bar
7 Grass catcher
8 Back wheels
GB
23